EP

January 13, 2021

Any harm within the teeth surfaces of the sprocket diminishes the existence in the conveyor chain.
With traditional sprockets, substantially worn sprocket teeth had been repaired by teeth padding or even the whole sprocket was replaced. In either situation, repair was costly and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients for your dramatic cost savings in expense and time.
Construction
The teeth could be replaced by two procedures: personal tooth replacement or sectional teeth substitute.
The bolts and nuts used for mounting the teeth on to the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the proper.
The over photo and the leading proper illustration display a sprocket for personal tooth replacement. Because the joint encounter among the replaced teeth and also the sprocket is formed in a exclusive arc, the bonding accuracy is substantial plus the sprocket power is enhanced. On top of that, because the load acting within the mounting bolts is decreased, there exists less chance of loosening. This sprocket building is patented.
You will discover two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for substantial sprockets receiving heavy loads and welded sheet steel hubs for other applications.