EP

February 19, 2021

Jaw Variety Coupling Variety Method
The variety approach for figuring out the right jaw coupling dimension and elastomer calls for employing the charts shown on the following pages. You can find 3 components to become selected, two hubs and 1 elastomer. When the shaft size with the driver and driven on the application are in the exact same diameter, the hubs picked is going to be the same. When shaft diameters vary, hubs picked will differ accordingly.
Information essential prior to a coupling might be selected:
HP (or KW) and RPM or Torque of driver
Shaft sizes of driver and driven equipment and corresponding keyways
Application description
Environmental circumstances (i.e. intense temperature, corrosive circumstances, room limitations)
Actions In Picking A Jaw Coupling
Phase 1: Figure out the Nominal Torque of the application by utilizing the next formula:
Nominal Torque = in-lb = (HP x 63025)/RPM
Nm = (KW x 9550)/RPM
Phase two: Applying the Application Services Aspects Chart one select the services aspect which finest corresponds for your application.
Phase three: Calculate the Design and style Torque of your application by multiplying the Nominal Torque calculated in Phase one through the Application Service Issue established in Phase 2.
Design and style Torque = Nominal Torque x Application Support Element
Step four: Utilizing the Spider Overall performance Information Chart 2, choose the elastomer materials which greatest corresponds for your application.
Step five: Working with the Jaw Nominal Rated Torque Chart three , locate the ideal elastomer material column for that elastomer selected in Step 4.
Scan down this column towards the 1st entry wherever the Torque Value in the suitable column is better than or equal on the Design Torque calculated in Step three.
As soon as this value is found, refer towards the corresponding coupling dimension in the first column of the Jaw Nominal Rated Torque Chart 3 .
Refer on the highest RPM worth for this elastomer torque capability to make certain the application necessities are met. If the requirement is not content at this point, a different form of coupling might be demanded for that application. Please seek the advice of Lovejoy engineering for support.
Step 6: Evaluate the application driver/driven shaft sizes to your maximum bore dimension offered on the coupling selected. If coupling bore dimension is not huge enough to the shaft diameter, decide on the following greatest coupling that will accommodate the driver/driven shaft diameters.
Phase 7: Using the UPC quantity selection table , locate the proper Bore and Keyway sizes necessary and find the variety.