EP

December 22, 2020

Highest wear resistance readily available by sealing grease involving pins and bushings
The sturdiness of chain is considerably enhanced given that grease is sealed amongst the pins and bushings by O-rings. The O-ring chain could be the most dependable model on the Greatest Daily life Chain Series with its great dress in resistance even while in the conditions or environments the place chain maintenance is tough.
Proposed makes use of.
?Circumstances wherever regular chain substitute is required resulting from dress in stretch
?Situations in which lubrication during the service is not possible
?In an environment with significantly soil, sand, dust, and so forth.
?Applications that need power higher than that of the sintered bushing roller chain
Other capabilities
?Minimizing noise. (The noise degree is three dB reduce compared to regular roller chains.)
?Decreasing vibration using the friction developed by O-Ring. (The electrical power reduction due to the friction is almost negligible, since the frictional force concerning the pins and bushings is for normally in the applications.)
Choice of chains
The strength of an O-ring chain is almost the identical as that of the common roller chain. (Since the pins are longer than those of standard roller chain, the average rupture strength is somewhat reduced.)
For picking out a suitable chain, refer to “Selection of Chains” .
Once the services ambient temperature is increased than 80° C, special heat resistant O-rings must be made use of. In this case, get hold of us for far more info.
Connecting links and offset back links
Two kinds of connecting links can be found: clearance fit and interference fit. When high strength or sturdiness is needed, use interference-fit connecting link. Only 2POJ is accessible since the offset link for all sizes.
Sprockets
O-ring chain makes use of longer pins than a standard roller chain. When working with multiplex O-ring chain, the conventional sprocket for multiplex chains cannot be used.
Caution
O-ring chain is not proposed in applications exactly where solvents or other substances might assault “Nitric Rubber”. Special materials O-rings may also be offered for these ailments: Please talk to us for details. Normally, “Nitric Rubber” is broken by speak to together with the following chemical products.