one.A connecting link of an O-ring Chain for basic application is pre-coated with grease on the pins. Ahead of connection, confirm the grease to the surfaces of pins, and in case the volume of grease is compact, apply grease with bare hands. (If gloves are made use of, the grease might be absorbed by the gloves.)
Illustration: When the connecting link (I) of an O-ring chain for general application is
shipped, O-rings are fitted with the roots from the pins. If the O-rings come loose as a consequence of vibration during transport, refit the O-rings in towards the roots of your pins.
In this instance, you’ll want to return the grease collected in the roots of the pins for the central surfaces with the pins, extra at portion A than at portions B proven during the over illustration. (Portions A is worn on account of sliding with the bushings.)
2.The chain is usually most conveniently connected on the teeth of the sprocket. Engage the back links at each ends on the chain with all the sprocket teeth and match connecting pins. If your sprocket can be moved, the chain can also be linked to the loosened side.
three. Connecting method
1.Verify that O-rings are attached for the roots with the pins.
two.In the event the amount of grease applied around the connecting pins is little, coat the pins with grease in the central portions.
3.Insert the connecting pins to the bushings of the inner backlinks at the two ends.
four.Confirm that the grease is applied to the complete encounter with the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, install the spring clip. Confirm regardless of whether the head (the finish without a split) from the spring clip is turned in the feeding course from the chain. (See the next illustration.)
six.Make sure to verify that the spring clip is securely fitted during the clip grooves of the connecting pins.
This completes jointing on the connecting link. Note that grease around the surfaces of connecting pins and O-rings can be eliminated in the course of set up function. In this instance, re-grease employing the grease about the surface with the base chain or the grease inside the polyethylene bag through which the connecting hyperlink was contained.