A liquid ring vacuum pump is easy to operate and can be used in several applications across various industries. A liquid ring pump works together with a sealant required in its procedure. This liquid can be water, essential oil or any other solvent which can be rotated by an impeller within the casing of the pump.

As the shaft turns, a liquid band is established by the centrifugal force generated by the rotating impeller. This power holds the liquid ring against the inner wall structure of the pumping chamber. Since the impeller is located eccentric to the pumping chamber, the depth of entry of the blades into the liquid ring reduces and Liquid-Ring Vacuum Pump china improves as the impeller rotates. This creates increasing cell volume on the inlet port side, creating vacuum.

On the discharge interface side, the impeller cell volume decreases as the blades move further in to the liquid ring. This increases the pressure until discharge occurs through the discharge port.

A continuous flow of refreshing sealing liquid is supplied to the pump via the sealing-liquid inlet.

Regarding the two-stage liquid band pump, the discharge from the initial stage will not discharge to atmosphere. Rather, the 1st stage discharges through the manifold resulting in the second stage in addition to through a discharge port positioned in the intermediate plate between your first- and second-stage impellers.