Materials Dealing with Energy UNIT one
Basic Description
This energy unit is made for that fork lift sector, consisting of hugely efficient gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are controlled by the lever in the manual release valve, that is outfitted with an electrical switch to activate the motor. The lowing pace is controlled through the stress compensated flow handle valve.
Distinctive Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned before installation of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
4. Oil changing is needed soon after the original a hundred operation hrs, afterwards the moment each and every 3000 hours.
five. The power unit shown is made to be mounted horizontally.
Material Handling Energy UNIT two
Basic Description
This power unit features power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with the reducing speed controlled by the pressure compensated flow control valve. Items of this series can be extensively utilized in the business of logistic devices including fork lift, mini lift table, etc.
Special Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned just before mounting the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required after the initial one hundred operation hours,afterwards after each and every 3000 hrs.
five. The electrical power unit need to be mounted horizontally.